# Beam Deflection

A beam is a constructive element capable of withstanding heavy loads in bending. In the case of small deflections, the beam shape can be described by a fourth-order linear differential equation.

Consider the derivation of this equation. For a bending beam, the angle \(d\theta\) appears between two adjacent sections spaced at a distance \(dx\) (Figure \(1\)).

The deformation \(\varepsilon \) at each point is proportional to the coordinate \(y,\) which is measured from the neutral line. The length of the neutral line is unchanged.

It follows from the geometry of Figure \(1\) that

where \(R\) is the radius of curvature of the beam.

The magnitude of the normal stress \(\sigma\) in the cross section will also depend on the coordinate \(y.\) It can be estimated by Hooke's law:

where \(E\) is the modulus of elasticity of the beam.

The bending moment \(M\left( x \right)\) for a section of the beam relative to the \(z\)-axis is given by

where \(I\) is the moment of inertia of the cross section with respect to the neutral \(z\)-axis (Figure \(2\)).

Hence, we obtain the following expression for the radius of curvature of the beam:

It is known that the radius of curvature is given by

Assuming that the deflection of the beam is sufficiently small, we can neglect the first derivative \(y'.\) Then the differential equation of the elastic line can be written as follows:

The bending moment \({M\left( x \right)}\) can be expressed in terms of the known external load \({q\left( x \right)}\) acting on the beam. Indeed, we choose a small element \(dx\) and consider the conditions of its equilibrium (Figure \(3\)).

The sum of the projections of all forces on the \(z\)-axis is zero:

The sum of the moments of all forces about, for example, the right edge of the element \(dx\) (the point \(B\) in Figure \(3\)) is also equal to zero:

This implies the relationship

With this expression the differential equation becomes:

This equation is called the Euler-Bernoulli differential equation. If the values of \(E\) and \(I\) are constant along the \(x\)-axis, we get a fourth-order equation:

The given equation under the appropriate boundary conditions determines the deflection of a loaded beam.